Established in 2010, Yangzhou Feilong Lamp Manufacturing Co., Ltd. is a professional manufacturer and exporter that is concerned with design, development and production of LED lighting, especially for solar street lighting system. All of our products comply with international quality standards and are appreciated in a variety of different markets throughout the world. Our products have been exported to about 150 countries and regions abroad, including Europe, Africa, Middle East, Asia, Australia and the United States.
In addition, we also produce municipal street light, high mast lamp, traffic light system, road sign series, guard rail and their accessories. Welcome to buy and represent our related products.
1,Introduction
Solar street lighting system has the advantages of good stability, long life, high luminous efficiency, simple installation and maintenance, high safety, energy saving, environmental protection, economy and practicability. It can be widely used in urban main and secondary roads, residential areas, factories, tourist attractions, parking lots and other places. Both gel and lithium batteries are optional. The large capacity lithium battery used for solar street lighting system has a life expectancy of about 5-8 years, which is two times the life of the traditional gel battery and reduces the battery maintenance rate of the solar street light.
2,Specification
Parameters of LED Lamp
Power |
20W/24W/30W/40W/50W/60W |
Chip Type |
3030 chip |
Beam Angle |
120° * 70° |
Input Voltage |
AC85-277V, 50-60Hz, DC12V/DC24V |
Color Rendering Index |
≥ Ra70 |
LED Lifespan |
> 50000h |
Working Temperature |
-40°C~50°C |
Housing Material |
Die-casting aluminum |
Installation Method |
Wall/Pole |
IP Rating |
IP65 |
Warranty |
3 years |
Certificate |
CE, ROHS |
Application |
Highway, Garden, Courtyard, Road, Outdoor, etc. |
Total Harmonic Distortion (THD) |
<15% |
Color Temperature |
3000~6000k |
Parameters of Solar Panel
Power |
30W~150W(can be customized) |
Frame(Material.) |
Anodized aluminum alloy |
Module Efficiency |
13.21% |
IP Grade |
IP65 |
Cell Efficiency(%) |
17.50% |
Power Tolerance |
0 ~ +5W |
Front Glass Thickness(mm) |
3.2mm |
Cable |
2.5mm2 (IEC) / 12AWG (UL), 900mm (650mm is optional) |
Connectors |
MC4 or MC4 compatible |
Temperature Range |
-40°C ~85°C |
Warranty |
90% of 10 years,80% of 25 years. |
Parameters of Lithium Battery
Type |
Lithium iron phosphate Battery |
Operating Voltage |
12V |
Rated capacity |
20AH~120AH |
Battery Storage Working Temperature |
-25°C~60°C |
Working Humidity |
No more than 85% RH |
Rating Current |
10A |
Protection Mode |
Overcharge, over-discharge and overload protection, as well as short-circuit and reverse connection protection |
Controller Efficiency |
>95% |
Lifetime |
5~7 years |
Parameters of Light Pole
Material |
Q235 Steel |
Type |
Octagonal or Conical |
Height |
5~11M |
Galvanizing |
Hot dip galvanized (average 100 micron) |
Powder Coating |
Customized powder coating color |
Wind Resistance |
Designed to with stand wind speed of 160km/hr |
Life Span |
>20 years |
Parameters of Anchor Bolt
Material |
Q235 Steel |
Bolts and Nuts Material |
Stainless Steel |
Galvanizing |
Cold dip galvanized process ( optional ) |
Features |
Detachable, helping to save transport space and cost |
The above configuration is only for reference and the actual configuration is designed according to the actual conditions and the customer special requirements.
3,Feature and Application
• Energy-saving: solar photoelectric conversion to provide electricity, inexhaustible, inexhaustible.
• Environmental protection: no pollution, no noise, no radiation.
• Convenience: simple installation, no need to wire, no power cut concerns
• Long life: high technology content of products, control systems, accessories are international brands, intelligent design, reliable quality.
• Less investment: because of the simplicity of the circuit, there is no maintenance cost and no expensive electricity cost.
4,Details
5, Production Process
6,Packaging and Shipping
7,FAQ
Q1. Are you a factory or a trading company?
A:We are a factory and we have a professional research and development team of skilled workers and technician.
Q2. What about the lead time?
A: Sample needs 5-7 days, mass production time usually needs 2-3weeks.
Q3. What is your terms of payment?
A: Usually we accept T/T, irrevocable L/C at sight. For regular orders, Terms of payment 30% deposit, full payment before delivery the goods.
Q4. How to proceed an order?
A: Firstly, let us know your requirements or application.
Secondly, we quote according to your requirements or our suggestions.
Thirdly, customer confirms the samples and places deposit for formal order.
Fourthly, we arrange the production and delivery.
Q5. Is OEM or ODM acceptable?
A :Yes, both OEM and ODM are acceptable.
http://www.ledsolarstreetlights.com/